logo.png

SX series

SX series

Servo presses

  • Press capacity: 900-3,375 US t
  • Part size: medium to large
  • Slide kinematics: servo (freely programmable)
  • Application: stamping, cutting, bending, embossing, drawing, integration of subsequent processes

Presses with servo direct drive stand for highly dynamic forming processes and offer maximum flexibility in the production. In combination with a high stiffness value of press body and drive, they deliver consistently high part quality.

Features and benefits: 
  • The servo direct drive allows due to the characteristic pendulum motion a significant output increase compared to conventionally driven presses.
  • Due to the individual programming of the slide movement, the forming process can be optimally adapted to the requirements of die and part.
  • The very solid, low-stress annealed press bodies are FEM-calculated and optimized by individual so-called "hot-spot analysis" in areas which are subject to higher loads.
  • Motor(s), power electronics, holding brake, lubrication and control are of German origin and guarantee a long service life and maximum dynamics.
  • The slide guiding system ensures a high level of tilting rigidity and reduces the cutting impact during the processing when it comes to processing of high-strength materials
     

Standard equipment:

  • Electrical slide adjustment
  • Hydraulic, continuous slide locking
  • Automatic slide counter balancing
  • Hydraulic overload protection
  • Vibration isolated installation
  • Central circulation lubrication
  • Press force monitoring (single force and sum force)
  • Three predefined slide movement profiles for standard applications
  • Curve generator for individual slide movement profiles
Options: 
  • Simulation software for output forecasting
  • Mechanical or pneumatic part ejector
  • Pneumatic or hydraulic die cushion
  • Various concepts for executing the power electronics includ-ing capacitor bank or kinetic energy buffer
  • Press force monitoring (signature force)
Die change concepts: 
  • Moving bolsters in Front-to-back arrangement with two die change positions for a time efficient set-up process
  • Moving bolsters in T-track arrangement with two die change positions for installations in areas with limited space

Automation levels:

  • BASIC: Manual die change
  • PLUS: Semi-automatic die change
  • ADVANCED: Fully automatic die change
Technical data: 
Description Unit SX-800
2P | 4P
SX-1000
2P | 4P
SX-1250
2P | 4P

SX-1600
2P | 4P

SX-2000
4P
SX-2500
4P
SX-3000
4P
Press capacity kN | US tons 8,000 | 900 10,000 | 1,125 12,500 | 1,400 16,000 | 1,800 20,000 | 2,2580 25,000 | 2,800 30,000 | 3,375
Stroke rate* 1/min 3-55 3-50 3-40 3-38 3-38 3-34 3-34
Stroke length mm | in 500 | 19.7 500 | 19.7 600 | 23.6 600 | 23.6 800 | 31.5 800 | 31.5 800 | 31.5
Slide adjustment mm | in 400 | 15.7 400 | 15.7 400 | 15.7 400 | 15.7 400 | 15.7 400 | 15.7 400 | 15.7
Die height** mm | in 1,100 | 43.3 1,100 | 43.3 1,200 | 47.2 1,400 | 55.1 1,500 | 59.1 1,500 | 59.1 1,650 | 65
Slide and bolster dimensions | 2P mm 4,600 x 1,800 5,100 x 1,800 5,100 x 1,800
6,100 x 1,800
6,100 x 1,800 - - -
Slide and bolster dimensions | 2P in 181.1 x 70.9 200.8 x 70.9 200.8 x 70.9
240.2 x 70.9
20.2 x 70.9 - - -
Slide and bolster dimensions | 4P mm 4,600 x 2,200 5,100 x 2,500 5,100 x 2,500
6,100 x 2,500
6,100 x 2,500 6,100 x 2,500
7,300 x 2,500
6,100 x 2,500
7,300 x 2,500
6,100 x 2,500
7,300 x 2,500
Slide and bolster dimensions | 4P in 181.1 x 86.6 200.8 x 98.4

200.8 x 98.4
240.2 x 98.4

240.2 x 98.4 240.2 x 98.4
287.4 x 98.4
240.2 x 98.4
287.4 x 98.4
240.2 x 98.4
287.4 x 98.4
Foundation required Yes/No Yes Yes Yes Yes Yes Yes Yes

 

*Depending on programmed stroke length, slide kinematics, part dimension and existing die limitations | **Slide stroke down, adjustment up (SDAU) | 2P = 2-point design, 4P = 4-point design | Subject to technical modifications

Simpac America Co. Ltd.

Simpac is South Korea's market leader in forming technology and, with over 40 years of experience, is also one of the leading international press manufacturers. The customers of Simpac belong to various branches of the metal processing industry: Automotive industry and its suppliers, manufacturers of domestic appliances and household goods, companies in the furniture and electronics industry and companies in the aerospace industry.

The wide product range includes mechanical and hydraulic presses, servo presses, tandem lines and automation solutions. Simpac also has an extensive service network with local contractual partners worldwide. With the establishment of a second research and development center in Germany in 2017, the Simpac Holding employs around 680 people in eight countries.